Tuesday, October 16, 2012

Informational- Borax Info and MSDS

Borax; Sodium borate decahydrate 

EcoPunk's recap:
Borax is a naturally occuring chemical derived from Boron, which is naturally present in the Earth as well as the human body (in very small amounts!).
It gets stellar reviews as a cleaning product, but should not be ingested, the dust should not be breathed in, and it would be a good idea to limit excessive direct contact with the powder. The amount left on clothing after a wash cycle is not enough to cause any issues, but some people have skin reactions to direct contact.
Borax is a flame retardant, and can also be used as a pesticide (I would not use it on the garden, but possibly around the front door to keep ants and scorpions out of the house).


Source: http://www.20muleteamlaundry.com/about/what-is-borax/

Borax is the common name for sodium tetraborate: a naturally occurring substance produced by the repeated evaporation of seasonal lakes.
20 Mule Team® Borax is 100% natural, and 99.5% pure (there is about a half of 1% of naturally occurring trace minerals). Once removed from the ground it is washed, dried, and boxed for consumers.
Borates, borax and boron compounds are with us throughout our lives. Families use it to soak and wash diapers and other laundry, but it’s also an ingredient in cosmetics, medicines, ceramics and building materials.
The biggest industrial user of borates is the glass industry (especially fiberglass and gorilla glass). It’s an important ingredient in agricultural chemicals and fire retardants.
20 Mule Team Borax comes from California where one of the world’s largest deposits was discovered in 1913.
Absolutely nothing is added. No phosphates, per-oxside, chlorine, or other additive chemicals.


Here are a few suggestions:

Kitchen
Why does everyone at a party end up in the kitchen? Kitchens are the modern-day hearth. Our sanctuaries of peace and plenty, so top-shelf cleaning and sanitation is in high demand here.

For scratch-free cleaning of stains, grime, and grease throughout the kitchen, use a 1/2 cup of 20 Mule Team Borax dissolved in one gallon of hot water on sinks, counter tops, cookware, refrigerators, microwaves, toasters, and any other appliance in your arsenal. You can apply this dilution of all-natural 20 Mule Team Borax to any surface including tile, ceramic, porcelain, slate, marble, granite and stainless steel.

Dishes, pots, and pans
Add a half cup of 20 Mule Team Borax to reduce water spotting, remove grime, and put a shine on dishes, utensils, pots, and pans.

Dishwasher detergent boosting
Increase the power of your dishwasher detergent by sprinkling a 1/4 cup of 20 Mule Team Borax onto the bottom of the dishwasher to reduce spots and film on dishes and glasses.

Multi-purpose cleaning
Dilute a 1/2 cup of 20 Mule Team Borax in a 12-ounce spray bottle of water to deodorize mattresses. Use a 1/2 cup of 20 Mule Team Borax per gallon of water in humidifiers for odor control.

Carpet cleaning
Use a 1/2 cup of 20 Mule Team Borax per gallon of water in carpet steam cleaning machines.

Bathrooms
Bathrooms are tailor made to benefit from the cleaning power that 20 Mule Team Borax has to offer.
Sprinkle 20 Mule Team Borax on a damp sponge or cloth and wipe on shower stalls, tubs, walls, and tile to remove soap scum, hard water deposits, and dirt.
20 Mule Team Borax is the economical way to tackle daunting jobs like brightening grout and tile. With 20 Mule Team Borax, you don’t have to scrub and scrape to remove rings around the tub and other tough bathroom grime.
Sprinkle 1/4 cup of 20 Mule Team Borax into the bowl, then swish with your toilet brush to keep bowl and brush bacteria—and odor—free.

Pets
All-natural, affordable 20 Mule Team Borax keeps pet-cleaning tools, car carriers, and all pet areas odor-free and sparkling with natural cleanliness.
Spray pet beds, wipe down pet carriers, or soak pet cleaning tools in a half cup of 20 Mule Team Borax.

Arts and crafts
Fresh-cut flowers of many varieties may be permanently preserved. 20 Mule Team Borax removes moisture from blossoms and leaves, thereby preventing the wilting which would normally result. Two different mixtures (by weight) are recommended: two parts 20 Mule Team Borax and one part dry white sand, or one part 20 Mule Team Borax and two parts corn meal.

Begin by cutting flowers which are as free from surface moisture as possible. The stem may be left attached or removed below base of the calyx. (Calyx is the green leafy part of the flower—a cup-like area above the stem.) Sprinkle Borax mixture into an empty box (a shoe box is ideal) and place flower and leaves, if desired, on the mixture. Gently cover the flower with additional mixture, being careful not to crush or distort the petals. Some flowers that have a large number of overlapping petals, such as roses and carnations, are best treated by sprinkling mixture directly into the blossom before placing them into the box. When completely covered, there should be no air space around the flower. For easy removal, use two flowers per box maximum, depending on flower size. Seal the box with tape and store at room temperature in a dry place for seven to ten days. (Experimentation will perhaps shorten this waiting period by several days depending on climate and type of flower.)

After flowers are dried, remove by slowly pouring the mixture from the box until enough of the flower appears and can be secured with two fingers. Pour off remaining mixture until flower can be removed without damage. Clean off any clinging materials with a soft artist’s brush. Whole petals which have been broken off may be glued back in place. The mixture may be used over again. Strain it to remove flower and foliage debris, then store in a cool, dry place.

NOTE: This process may not work on flowers that have been cut and placed in a water solution or preservative to keep them fresh. Cut flowers purchased from florists, for example, may not be suitable for this process if such a solution has been used.

Candlewicks
If you make your own candles, here’s a special treatment for the wicks that will help reduce ash and eliminate smoke problems.

Dissolve 1 tablespoon of table salt and 3 tablespoons of 20 Mule Team Borax in one cup of warm water. Soak heavy twine, such as butcher’s twine for large candles, in the solution for at least 24 hours. Allow twine to thoroughly dry before using to make candles.




MSDS: http://130.15.90.245/Chin-Sang%20Lab%20MSDS/Fisher/Sodium%20Borate(MSDS).htm
EMERGENCY OVERVIEW
Appearance: white solid. Caution! May cause eye, skin, and respiratory tract irritation.
Target Organs: None.

POTENTIAL HEALTH EFFECTS
Eye: May cause eye irritation.
Skin: May cause skin irritation.
Ingestion: May cause irritation of the digestive tract. Human fatalities have been reported from acute poisoning.
Inhalation: May cause respiratory tract irritation.
Chronic: No information found.


FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
Ingestion: Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician: Treat symptomatically and supportively.


PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: white
Odor: odorless
pH: 9.5 (aq soln)
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point: 1575 deg C
Freezing/Melting Point: 741 deg C
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density: 1.7300g/cm3
Molecular Formula: B4Na2O7.10H2O
Molecular Weight: 381.36


STABILITY AND REACTIVITY
Chemical Stability: Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid: Dust generation.
Incompatibilities with Other Materials: Strong acids, metallic salts, alkaloid salts.
Hazardous Decomposition Products: Oxides of boron.
Hazardous Polymerization: Will not occur.


Clean Air Act:
This material does not contain any hazardous air pollutants. This material does not contain any Class 1 Ozone depletors. This material does not contain any Class 2 Ozone depletors.

Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA. None of the chemicals in this product are listed as Priority Pollutants under the CWA. None of the chemicals in this product are listed as Toxic Pollutants under the CWA.

OSHA:
None of the chemicals in this product are considered highly hazardous by OSHA.






No comments:

Post a Comment